Language:  
Currency:
VAT Mode:
Search
 go
Browse By Department


Help & Info

TIA568 Wiring Standards

How to decide which wiring pattern to use:

1. Does the job specification call out a wiring pattern?
2. Does the customer/end user have a preference for T568A or T568B?
3. Have patch panels already been purchased for the job? If so, they will probably be either T568A or T568B. The jacks should be wired to the same pattern as the panels.
4. Are you adding on to an existing wiring plant? If so, your new wiring should match the existing wiring.

If none of the factors above apply, either T568A or T568B may be used. It is important to ensure that the workstation connectors and the patch panels are wired to the same pattern. T568B is commonly used in commercial installations, while T568A is prevalent in residential installations.

Click Here for a Full-Color Acrobat pdf file ( 697k ) - Right click to save it to disk.


For a more complete selection of products (no online ordering available at that site), visit the original Lashen Electronics website located at http://www.lashen.com.

Now In: LevitonLeviton Audio → Leviton AES36 Outdoor/All-Weather Three-Way Loudspeaker

Leviton Outdoor/All-Weather Three-Way Loudspeaker


Leviton Outdoor/All-Weather Three-Way Loudspeaker

Leviton AES36 Outdoor/All-Weather Three-Way Loudspeaker

E-mail this product to a friend E-mail this product to a friend


Previous  Up  Next" 

The AES36 Outdoor/All-Weather Three-Way Loudspeaker is a high performance speaker system with a weather-resistant ported bass-reflex enclosure. Use the AES36 in any outdoor or utility application where the specifications call for sound quality and clarity from an exceptionally durable, flexible design.

  • Sealed enclosure, mirror-image design
  • All-metal gold-plated binding posts
AES36 Outdoor/All-Weather Three-Way Loudspeaker
Driver
complement:
1 in (25 mm) Pure Titanium shielded dome tweeter
4 in (100 mm) WeatherPlas shielded midrange with Linear Field Proximity (LFP) bezel
6 in (150 mm) WeatherPlas (polymer-coated cellulose fiber cone) shielded woofer with rubber surround, high-temperature/oversized Kapton® voice coil, Symmetrical Field Geometry (SFG) magnet design and cast aluminum basket
Frequency Response (-3dB): 60 Hz-20 kHz
Sensitivity (2.83V/1m): 90 dB
Power Handling: 150 Watts
Impedance: Nominal 8 Ohms
Physical Dimensions and Weight:
Height: 10.25 in (260 mm)
Width: 14.62 in (371 mm)
Depth: 5 in (127 mm)
Weight: 11 lb/5 kg per speaker

Price: $307.24 


Quantity:  

Leviton 40832 Series BNC Gold QuickPort® Snap-In Module
Leviton 40832 Series BNC Gold QuickPort® Snap-In Module
Leviton AEN24 Outdoor/All-Weather Two-Way Loudspeaker
Leviton AEN24 Outdoor/All-Weather Two-Way Loudspeaker
Leviton HKABV Amplified In-Wall A-BUS® Volume Control
Leviton HKABV Amplified In-Wall A-BUS® Volume Control
BES FIB101 Bullnose FiberFish Tip 1/4
BES FIB101 Bullnose FiberFish Tip 1/4"






Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

There are no comments for this product.