HCP03-10W - Provides one-button programming through address capturing. Provides manual
and remote ON/OFF switching and remote full-range dimming for plug-in
incandescent lamps. No wiring necessary; plugs into 15 Amp AC outlet. Allows
local control of any lamp plugged into it. Available in White (-W) only.
Provides Scene Control capability when used with DHC Scene Controller HCCS7-1TW
and HCCPG-1TW DHC Toscana Deluxe Programmer. Also backward compatible with
16400/16450-S and 16400/16450-SD DHC Scene Controllers. Equipped with Leviton's
Intellisense™ Technology advanced circuitry for the utmost in reliability, even
where electrical "noise" exists on the power line. Responds to ON, OFF, DIM,
BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands.
Rated: 120V 60Hz, 300W Incandescent
NOTE: A Cat. No. HCA02-10E DHC System Amplifier Module must be installed in every DHC installation to ensure
maximum signal strength. In some installations more than one may be required.
Features:
- New one-button programming through address capturing for easy programming
- Plug-in Lamp Module adds convenience of remote ON/OFF and DIM/BRIGHT DHC
switching capability to plug-in incandescent lamps
- Provide Scene Control capability when used with DHC Scene Controller
HCCS7-1TW or HCCPG-1TW DHC Toscana Deluxe Programmer for varying function and
mood lighting schemes in living rooms, home theaters and other rooms at the
touch of a button. Also backward compatible with 16400/16450-S and
16400/16450-SD DHC Scene Controllers
- Soft ON/Fade OFF feature for smooth increasing and lowering of brightness
levels; extended bulb life
- Preset feature turns lights ON at last selected brightness level;
eliminates the need to readjust settings each time dimmer is switched ON
- Protected memory maintains light levels during minor power fluctuations
- Features Leviton's Intellisense™ Technology (gated automatic gain control)
which adjusts receiver sensitivity to help eliminate signal problems due to
line noise
- Use existing 60Hz 120V AC house wiring to add multi-location switching
without resorting to complicated and costly conventional wiring means
- Modules are backward compatible with 16400/450-S and 16400/450-SD DHC Scene
Controllers
- Programmable in 1% increments to customize any number of lighting scenes
(Requires use of separate software module)
- Backed by a Limited Two-Year Warranty
