With ultrasonic and infrared sensing, this top-of-the-line sensor provides
the highest degree of immunity to false tripping. Auto-Adapting circuitry
fine-tunes delay settings for "install and forget" simplicity.
The OSW12-M Occupancy Sensor uses ultrasonic sensing for maximum motion
sensitivity and infrared sensing for highest lights-off reliability. The sensor
continually analyzes and adjusts to changing conditions.
The OSW12-M Occupancy Sensor uses the latest microprocessor-based technology
which permits the detector to continually adjust and optimize its performance.
The detector requires a 24 volt OSPxx Series power pack.
By combining ultrasonic and infrared technology, the OSW12-M Occupancy
Sensor provides excellent small motion sensitivity (US) and error immunity
(IR). The mounting base, provided with the sensor, allows quick and easy
mounting in corners, on wall or on ceilings.
Features
- Multi-Technology: By using both infrared and ultrasonic signals, the
sensor minimizes false reading for high reliability.
- Flexible Base Mounting: Supplied twist-and-lock base mount permits fast
alignment. Supplied cover hides mounting hardware and wires. Can be used with
raceways for hard surface installing. Wall or ceiling mount.
- Wide Coverage: Over 1200 sq. ft of coverage.
- Timer Settings: Automatic and Manual - 30s to 30 min. Test mode - 6 sec.
- Self-Adjusting: Internal microprocessor continually analyzes, evaluates
and adjusts settings. Performance is kept at a maximum and user complaints are
eliminated.
- Non-Volatile Memory: Learned and adjusted settings saved in protected
memory are not lost during power outages.
- Ambient Light Recognition: A photocell prevents lights from turning on
when the room is adequately lit by natural light. Both "occupied" and
"low-light-level and occupied" lights-on control wires are supplied.
