The Leviton line of Wireless Occupancy Sensors (WSCxx-I0W) work inconjunction with the Wireless Wall Switch Receiver (WSS10-xDx) and theWirelessSelf-Powered Remote Switch (WSS0S-P0x). These wireless products combineLeviton’s occupancy sensing technology with self-powered and wirelesstechnologies, developed and licensed from EnOcean®.

The Wireless Occupancy Sensors have a built-in solar cell that drawsonavailable room light to power itself and can operate for up to 48 hourswithoutthe need for batteries or external power in standard manual-ON/Auto-OFFmode.Batteries are required for continuous uninterrupted Auto-ON operation.

The sensors use a small detector located directly behind a uniquemulti-zoneoptical lens. This exclusive Fresnel lens establishes dozens of zonesofdetection, which can be configured (manual masking) to block outunwantedtraffic zones (i.e. outside hallway traffic). The sensors respond toany sourceof heat within the range of detection, including the heat emitted bythe humanbody, however, the sensor is only triggered when the source of heatmoves fromone zone of sensing to another. Stationary heat sources will nottrigger thesensor.

Features

• No Additional Wiring: Wireless Occupancy Sensors communicate with the Wall Switch Receiver and Self-Powered Remote Switch via wireless technology, eliminating the need to pull any additional wire
• Auto-ON and Manual-ON Options: occupancy sensors are shipped in Manual-ON/Auto-OFF default mode from the factory. Three AAA batteries are required to enable the continuously uninterrupted Auto-ON/Auto-OFF mode
• Up to 48 Hours of Stored Power: solar panel provides up to 48 hours of power to the occupancy sensor when no ambient light is available
• Exclusive Walk-Thru Feature: provides increased energy savings by not leaving the lights on for an extended period after momentary occupancy
• All Digital Circuitry: uses minimum components for maximum reliability and low cost