- 110V AC to 220V AC or 220V AC to 110V AC
- Heavy Duty Transformer for safety and reliability
- ON/OFF switch with indicator light
- Universal output receptacles (will accept European 2 round pin plug, North American 2 flat pin and 3 prong plug)
SAFETY FEATURES INCLUDE:
- Built-in (non-detachable) power cord with strain relief
- Fused Protection
- Safety polarized input switch (100V AC, 200V AC, 220V AC and 240V AC)
- Non slip rubber feet
How To Find Voltage And Wattage Ratings On Your Appliance
To determine the correct model voltage converter or heavy duty transformer you need, you must know the
voltage and wattage requirements of your appliance. You can find this information listed on the appliance
manufacturer's label located on the back or bottom of the appliance or in the specifications section
of the appliance owner's manual. The label or manual will show the input voltage (100, 120, 220, 240
written as: 120 volts, 120V, 120 volts AC, or 120VAC), the wattage (100 watts or 100W), or the amperage
(0.5 Amps or 0.5A or 500mA).
IMPORTANT NOTE:
If only the amperage rating is shown, multiply the input voltage by the amperage rating to find the
wattage rating.
Volts x Amps = Watts
or 110V x 1.5 A = 165W
This is also written as 165VA
Cycles - 50 Hz vs. 60 Hz
North American 110-120 volt electricity is generated at 60 Hz. (Cycles) Alternating Current. Most
foreign 220-240 volt electricity is generated at 50 Hz. (Cycles) Alternating Current. This difference in
cycles may cause the motor in your 60 Hz. North American appliance to operate slightly slower when used
on 50 Hz. foreign electricity. This cycle difference will also cause analog clocks and timing circuits
that use Alternating Current as a timing base to keep incorrect time. Most modern electronic equipment
including battery chargers, computers, printers, stereos, tape and CD players, VCR/DVD players, etc.
will not be affected by the difference in cycles.
IMPORTANT: Voltage converters and transformers do not convert cycles.