Search:  

TIA568 Wiring Standards

How to decide which wiring pattern to use:

1. Does the job specification call out a wiring pattern?
2. Does the customer/end user have a preference for T568A or T568B?
3. Have patch panels already been purchased for the job? If so, they will probably be either T568A or T568B. The jacks should be wired to the same pattern as the panels.
4. Are you adding on to an existing wiring plant? If so, your new wiring should match the existing wiring.

If none of the factors above apply, either T568A or T568B may be used. It is important to ensure that the workstation connectors and the patch panels are wired to the same pattern. T568B is commonly used in commercial installations, while T568A is prevalent in residential installations.

Click Here for a Full-Color Acrobat pdf file ( 697k ) - Right click to save it to disk.


For a more complete selection of products (no online ordering available at that site), visit the original Lashen Electronics website located at http://www.lashen.com.
Email Address

Tripp Lite IS500HG 500 Watt Isolation Transformer - Medical Grade line noise reduction and spike suppression


Tripp Lite IS500HG 500 Watt Isolation Transformer - Medical Grade line noise reduction and spike suppression

Tripp Lite IS500HG 500 Watt Isolation Transformer - Medical Grade line noise reduction & spike suppression

Owners Manual

  • Complete line isolation, noise filtering and surge suppression is ideal for sensitive equipment
  • 500 watts, 4 outlets, 6-ft. power cord
  • Hospital-grade plug and receptacles
  • 2-year limited product warranty

Tripp Lite Isolator series UL2601-1 listed Hospital Grade isolation transformers offer line isolation, continuous noise filtering and enhanced common mode surge suppression. Internal low-impedance isolation transformer component offers 100% isolation from the input AC line. Full UL2601-1 medical grade listing with hospital-grade plug and outlet receptacles makes Isolator Hospital Grade transformers ideal for the protection of sensitive electronic equipment in patient-care areas. Isolation transformer with Faraday shield reduces the cumulative leakage current of the Isolator and connected equipment to levels below 300 microamps. Secondary neutral to ground bonding virtually eliminates common mode noise, providing an isolated neutral-ground reference for sensitive equipment and an inexpensive alternative to the installation of dedicated circuits and site electrical upgrades. Removes EMI/RFI noise, utility switching transients, and harmonics generated by other on-site loads and utility or lightning related surge conditions. Additional surge suppression components placed at the line input and output combined with full line isolation offers continuous filtering of a full range of power line noise in all modes. Active transformer filtering offers continuous common-mode noise rejection with no wearable parts, uniquely able to reduce surges in the worst of power environments to harmless levels. Reduces 6000V IEEE587 Cat A&B ring wave and combination wave test surges to only 0.5V common mode. Model IS500HG includes 4 widely spaced NEMA5-15R hospital grade output receptacles, a 6-ft power cord, hospital grade input plug, circuit breaker overload protection and lighted power switch. Rugged all-metal unit housing ships ready for placement in any industrial, medical, office or network environment.

  • PLUG / OUTLETS: Input: NEMA 5-15P Hospital-Grade / Output: 4 NEMA 5-15R Hospital Grade
  • ELECTRICAL: 120V AC, 60Hz, 2.1A (Requires NEMA 5-15R wall receptacle)
  • FORMAT: Upright tower
  • ISOLATION: Transformer based line isolation with Faraday shield

Features:

  • Tripp Lite's IS500HG Hospital Grade isolation transformer offers line isolation, continuous noise filtering and enhanced common mode surge suppression.
  • Internal low-impedance isolation transformer with Faraday shield offers 100% isolation from the input AC line
  • Full UL2601-1 medical grade listing with hospital-grade plug and outlet receptacles makes Isolator Hospital Grade transformers ideal for the protection of sensitive electronic equipment in patient-care areas.
  • Reduces the cumulative leakage current of the Isolator and connected equipment to levels below 300 microamps.
  • Secondary neutral to ground bonding eliminates common mode noise, providing an isolated ground reference for sensitive equipment
  • Serves as an inexpensive alternative to the installation of dedicated circuits and site electrical upgrades
  • Removes EMI/RFI noise, utility switching transients, load generated harmonics and ground loops
  • Additional surge suppression components placed at the line input and output combined with full line isolation offers continuous filtering of a full range of power line noise in all modes
  • Active transformer filtering offers continuous common-mode noise rejection with no wearable parts, uniquely able to reduce surges in the worst of power environments to harmless levels
  • Reduces 6000V IEEE587 Cat A&B ring wave and combination wave test surges to only 0.5V common mode
  • Includes 4 widely spaced NEMA5-15R hospital grade output receptacles, a 6-ft power cord, hospital grade input plug, circuit breaker overload protection and lighted power switch.
  • Rugged all-metal unit housing ships ready for upright tower or wallmount placement in any industrial, medical, office or network environment
  • 2-year limited product warranty

Package Includes:

  • IS500HG Isolation transformer system
  • Instruction manual with warranty information

Price: $299.88 


Quantity:  

Tripp Lite APS2424 PowerVerter APS Inverter/Charger with Auto-Transfer Switching
Tripp Lite APS2424 PowerVerter APS Inverter/Charger with Auto-Transfer Switching
BES CR1248 Cable Reel Holder
BES CR1248 Cable Reel Holder
Tripp Lite APS2012 2000W PowerVerter APS Inverter/Charger with Auto-Transfer Switching
Tripp Lite APS2012 2000W PowerVerter APS Inverter/Charger with Auto-Transfer Switching
Tripp Lite PV2400FC Industrial-Strength Power for Heavy-Duty Applications
Tripp Lite PV2400FC Industrial-Strength Power for Heavy-Duty Applications






Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

There are no comments for this product.

Powered by AspDotNetStorefront