Language:  
Currency:
VAT Mode:
Search
 go
Browse By Department


Help & Info

TIA568 Wiring Standards

How to decide which wiring pattern to use:

1. Does the job specification call out a wiring pattern?
2. Does the customer/end user have a preference for T568A or T568B?
3. Have patch panels already been purchased for the job? If so, they will probably be either T568A or T568B. The jacks should be wired to the same pattern as the panels.
4. Are you adding on to an existing wiring plant? If so, your new wiring should match the existing wiring.

If none of the factors above apply, either T568A or T568B may be used. It is important to ensure that the workstation connectors and the patch panels are wired to the same pattern. T568B is commonly used in commercial installations, while T568A is prevalent in residential installations.

Click Here for a Full-Color Acrobat pdf file ( 697k ) - Right click to save it to disk.


For a more complete selection of products (no online ordering available at that site), visit the original Lashen Electronics website located at http://www.lashen.com.

Now In: Test Equipment and ToolsCable & Wire TestingTone Generators → Tempo 600LS Tone Test Set

600LS Tone Test Set


600LS Tone Test Set

Tempo 600LS Tone Test Set

E-mail this product to a friend E-mail this product to a friend


Product Instructions
Previous  Up  Next" 

Tone Test Set

Model 600LS is the most comprehensive tone test set, a must for professional telecom/data communications service and repair.

Features

  • Traditional alternating tone signal for wire identification
  • Line 1 & 2 polarity testing with 4 conductor modular plug
  • Audible line condition testing; level indicates dead, off-hook & working lines
  • Improved Talk battery supply for communication over inactive pairs
  • Audible resistance level measurement
  • Time & test functions using either modular plug or 24" alligator clip leads

Technical Specifications

Power: One 9V battery, nominal life 100 hrs
Transmitter frequency: 900/1100 Hz alternating nominal
Transmitter power into 600 ohms: 7 dBm
Talk battery into 600 ohms: 10 VDC
Voltage protection at 600 ohms in RES mode: 52 VDC (higher in other modes)
Construction: High impact ABS case
Dimensions: 1" x 2.375" x 6.25"
Lead Length: 24" test leads
Weight: 8 oz with battery

Price: $102.90 


Quantity:  

Intelix DIGI-VGASD-WP-R VGA, Stereo Audio, and IR/RS232 over Twisted Pair Wallplate Receive Balun
Intelix DIGI-VGASD-WP-R VGA, Stereo Audio, and IR/RS232 over Twisted Pair Wallplate Receive Balun
Intelix DIGI-VGASD-WP-S VGA, Stereo Audio, and IR/RS232 over Twisted Pair Wallplate Send Balun
Intelix DIGI-VGASD-WP-S VGA, Stereo Audio, and IR/RS232 over Twisted Pair Wallplate Send Balun
Intelix DIGI-VGASD-R VGA, Stereo Audio, and IR/RS232 over Twisted Pair Balun Receiver
Intelix DIGI-VGASD-R VGA, Stereo Audio, and IR/RS232 over Twisted Pair Balun Receiver
Intelix DIGI-HD-IR2-R Receive Balun 1080p HDMI and IR over two twisted pair cables
Intelix DIGI-HD-IR2-R Receive Balun 1080p HDMI and IR over two twisted pair cables






Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

There are no comments for this product.