Channel Vision Central Telephone Products from Lashen Electronics

TIA568 Wiring Standards

How to decide which wiring pattern to use:

1. Does the job specification call out a wiring pattern?
2. Does the customer/end user have a preference for T568A or T568B?
3. Have patch panels already been purchased for the job? If so, they will probably be either T568A or T568B. The jacks should be wired to the same pattern as the panels.
4. Are you adding on to an existing wiring plant? If so, your new wiring should match the existing wiring.

If none of the factors above apply, either T568A or T568B may be used. It is important to ensure that the workstation connectors and the patch panels are wired to the same pattern. T568B is commonly used in commercial installations, while T568A is prevalent in residential installations.

Click Here for a Full-Color Acrobat pdf file ( 697k ) - Right click to save it to disk.

For a more complete selection of products (no online ordering available at that site), visit the original Lashen Electronics website located at http://www.lashen.com.

Newsletter


Email Address

Channel Vision P-0921 2-Door Telephone Entry System

Speak to and grant access to two doors or a front door and an entry gate from any standard phone in the house by pressing a touchtone code*. Pair the system with a Channel Vision IU or DP Series door station and a modulator for a complete residential AV access control solution.

*Additional module required, see instruction manual

Features	Benefits
2-Door Connections	Connect system to two Channel Vision door intercom stations to speak to and grant access to either
RJ-45 & Screw Terminal Connections	Easy & versatile connection options
Distinctive Telephone Ring	Distinguish between door visitors or incoming phone calls
Works Without an Active Phone Line (No CO Mode)	Perfect for installation in new homes when phone lines are not yet active OR for households that rely mainly on cell phones but still want the phone access to the front door
Compatible with Door Intercom Station	Works with Channel Vision IU & DP door stations – Does not support Panasonic KSU system IU & DPs
Door Bell Chime Option	Door notification via telephone ring & standard door bell chime
2-Wires to the Front Door	Retrofit IU or DP intercom door station easily with existing doorbell chime wiring
3 Active LED Status Indicators	When phones ring; When door intercom station is in use; When door strike is activated
Doorbell Tone at Door Station	Visitor hears a tone when they press the doorbell button to acknowledge its ringing throughout the house
Built-In Aux Relay	Unlocks doors or gates remotely by the phone or can be utilized as a trigger contact to enable the input of an external paging system

< 1.5? x (w) 7? (h)>

Operating Temperature	-10°C to +50°C
Ring Output	>5 (capable of ringing > 10 phones with a REN of 0.5)
Compliance	FCC Part 15, subpart B & FCC Part 68 requirements; RoHs; Power supply meets UL1310 & CSA standards

Price: $256.37

Quantity:


Channel Vision C-0208 1 in 8 out RF splitter, 5-1000MHz, 11dB loss	Channel Vision C-0204 1 in 4 out RF splitter, 5-1000MHz, 7dB loss	Channel Vision C-0202 1 in 2 out RF splitter, 5-1000MHz, 3.5dB loss	Tempo PE7780 Data Mate® Precision Tracing Tone Generator

Product Rating:

(0.00) # of Ratings: 0 (Only registered customers can rate)

There are no comments for this product.