New Design
Weller has taken the rework station to the highest level; with the new WR3M. The versatile repair station is specifically tailored to the needs and requirements of professional repairs to latest-technology electronic sub-assemblies in industrial production engineering and in the repair and laboratory fields.
3 independent tool channels
with automatic tool detection guarantee the simultaneous operation of 3 soldering tools. Precise temperature control performance at the soldering tip is guaranteed by the digital control electrotechnology together with superior quality sensor and heat-transfer technology. High-speed measured-value acquisition provides for maximum temperature precision and optimum dynamic temperature performance in load situations.
High-Speed Micro Tools
All Weller High-Speed Micro Tools such as the WMRP micro soldering pencil and the WMRT micro desoldering tweezers can be connected. But also extremely powerful accessories, such as the new HAP200 hot-air pencil, can be easily connected.
Hot-air pencil HAP200
The HAP 200 provides a directional hot air flow that is adjustable. Electronic temperature control from 150°F to 999°F. Different nozzles available as accessory. Finger switch controls adjustable pump. (For use with WR 3M only.)
USB port
The WR3M is equipped with a mini USB port. The extensive PC software supplied can be used to update the software on the control unit. Software for monitoring, parameterising and data logging is included in the software package.
Operation simplicity
The big LCD display allows clear information and simple handling. Innovative special functions such as automatic channel changing, temperature preselection buttons for each channel, Factory Calibration Check.
WR3000M Contains the following:
- WR3M Repair Station
- HAP200 Hot-air pencil with WDH30 Safety rest
- DXV80 Desoldering iron with WDH40 Safety rest
- WP80 Soldering iron with WDH10T Stop + go Safety rest
- WVP Vacuum pick up
- WDC2 Dry cleaner
- Adapter for HAP200 Hot-air Pencil
- CD with use software
- USB cable
- Nozzle replacement tool
- 1.2mm and 3.0mm hot gas nozzles
- Nozzle adapter for HAP200
- 2.3mm and 2.5mm desoldering nozzles
- Desoldering cleaning tools, brush, and spare filters
- Color-coded clips for easy tool identification
Technical Specifications:
Dimensions
L x W x H (inches): |
10.75 x 9.25 x 4.02 |
| Weight: |
Approximately 14.8 lbs. |
| Power supply voltage: |
120 VAC, 60 Hz |
| Power consumption: |
400 Watts |
| EOS / ESD Properties: |
All Tool Handles, Cordsets and Air Flow are Static Free |
| Fuse: |
4 Amp |
| Temperature control range: |
Variable in (1) degree increments from 150°F - 999°F Controllable temperature range is tool-dependent |
| Temperature accuracy: |
± 17°F (Average tip temperature can be offset ± 9°F at idle with no load) |
| Temperature stability: |
± 9°F |
Hot Air / Vacuum Pump
(duty cycle: 30 seconds on,
30 seconds off): |
Max. vacuum 0.7 bar Max. delivery rate 18 l/min Hot air max. 15 l/min |
Vacuum Pick-up Pump
(duty cycle: 60 seconds on,
30 seconds off): |
Max. vacuum 0.5 bar Max. delivery rate 1.7 l/min |