|
Browse By Category
Browse By Manufacturer
Browse By Department
Help & Info
TIA568 Wiring Standards
How to decide which wiring pattern to use:
1. Does the job specification call out a wiring pattern?
2. Does the customer/end user have a preference for T568A or T568B?
3. Have patch panels already been purchased for the job? If so, they will probably be either T568A or T568B. The jacks should be wired to the same pattern as the panels.
4. Are you adding on to an existing wiring plant? If so, your new wiring should match the existing wiring.
If none of the factors above apply, either T568A or T568B may be used. It is important to ensure that the workstation connectors and the patch panels are wired to the same pattern. T568B is commonly used in commercial installations, while T568A is prevalent in residential installations.
Click Here for a Full-Color Acrobat pdf file ( 697k ) - Right click to save it to disk.
For a more complete selection of products (no online ordering available at that site), visit the original Lashen Electronics website located at http://www.lashen.com.
|
|
|
An Economical Soldering Station with High-End Performance
Innovative heater and sensor combination gives you quick heat-up and rapid temperature recovery
Wireless temperature lockout to prevent operators from raising the temperature to levels higher than specified for the board or component. Gives you control over the process
Station automatically powers down after 90 minutes of inactivity to prolong tip life and save power
Additional Features
- IMPROVED plug on the PES51 iron and new receptacle on the WES51PU power unit for easier iron replacement
- Designed for continuous production soldering
- Slim, comfortable pencil reduces operator fatigue
- Tip temperature offset capability which provides the user with the capability of resetting station temperature readings to match in tip sizes and styles
- Iron is fitted with a non-burnable silicon rubber cord for safety
- UL and cUL listed
- ESD safe to protect sensitive components
Technical Specifications
Base Unit
| Input voltage: |
120v |
| Output voltage: |
24v |
| Power consumption: |
60w |
| Temperature range: |
350°F - 850°F
(177°C - 454°C) |
| Footprint: |
4.5" x 5.9" x 3.6"
(114 x 150 x 91mm) |
| Weight (power unit): |
4.5 lb. (2.05kg) |
Temperature accuracy
calibration range: |
+/- 9°F (5°C) |
| Temperature stability: |
+/- 10°F (6°C) |
| ESD Safe: |
Yes |
|
PES51 Slim Profile Iron
| Power consumption: |
50w |
| Iron cord length: |
4' (1.22m) |
| Standard tip: |
ETA |
| Iron stand/sponge |
PH50 |
|
|
|
|
